Professional manufacturing in palm oil machine for edbile oil refinery

This peanut rosted drum type machine is mainly used to roast various kernels, for example, peanuts, chestnuts, walnuts, almonds,beans, melon seeds and other granular material of the baking or drying. The machine with electric heating type, fuel oil type, gas type, or coal type as a heat source; Principle of adopting rotary drum, heat conduction, heat radiation and using coal as fuel; It has automatic temperature control device; Hot air as the drying medium, the heat enerLD works on roasted peanut, which is constantly propelled by propulsion device in roasting process.

When the oil leaves the screw press it contains water, sand and impurities. During a process of static de-sanding and decanting, most of the impurities in the oil are removed in a centrifugal oil purifier. The last traces of oil in the effluent are recovered in a centrifugal sludge separator.

Specifications

1.Palm oil machine
2.Production line
3.High configuration
4.Filed installation
5.18 years manufacturing expe

About Yongle Factory : Our factory have been manufacturing in oil press machine , solvent extraction/leaching equipment and refining machine for 18 years . The machines have been exported to ULDekistan , Kazakhstan , Canada , Chile more than 12 countries .

Oil press machine:10-2500 tons per 24 hours.

Solvent extraction machine/leaching equipment :10-2000 tons per 24 hours.

Refining machine:1-500tons per 24 hours.

Palm oil extraction machine

We have enough experience and advanced machinery for making Palm oil, which leadthe technique in this field.

The crude oil from palm fruit , which should be refined for the better edible oil.

Pressing production line daily capacity :10tons-1000tons.

Refining prouction line daily capacity:5tons-600tons.

Fractionatinon equipment daily capacity:5 tons-600tons.

1. Palm fruits bunches pretreatment section :

Sterilizing section: Fresh palm fruit bunch are airtigLD sterilized in sterilizer. The purpose to prevent enzymes broken down, avoiding FFA content in oil further increase; Pretreatment peel, prepared for the follow-up processing; Pre-conditioning stone, reducing the damage kernel.

Picker palm fruit setcion: Remove the palm fruit from the bundle.

Boiling section Oil palm fruit first carry out cooking before pressed, fruit sterilized must be re-heating for the soft pulp, and damage pulp cell structure.

2. Pressing section:

The process adopts the special screw oil press, so the palm nut is out with the dregs without damaging.

3. Clarification section:

The crude oil first diluted with water washing, through settlement and filtration, the fiber material removed from the oil, and then carries out continuous settlement, the whole divided into two parts: Oil and sediment. Oil is filtered and through the pump pumped into the storage tank for storing; Oil sediment is filtered and dirt oil separation, oil processed is for the second settlement, dirt oil mixture process clarification separation, Skim oil then carry out a second settlement, sewage pumps to sewage treatment pond for dealing with.

4. Palm nut treatment process/Centrifuge sieve

This process adopts the centrifuge siever to separate the nut and fibre and dregs.

5. Palm oil refinery.

The crude palm oil from the palm will be pumped into oil refinery units to produce cooking oil at various grades. We adopts advanced physical refinery technoloLD, which is most methods for new CPO factory now.

The main operating process is including sedimentation/filtering, degumming, decolorization (bleaching), neutralization (removing free fatty acid) & deodorization with distillation, especially the fractionation process is necessary, which could get different liquid oil and fat. Different combination of steps and the treating degree of each step result in different grade cooking oil and salad oil.

6.Palm oil fractionate.

Fractionation of palm is important for getting different grade oil.

(1)Pre-processing.

Oil is better to be stored in a storage tank with constant stirring so as to avoid solid fat sedimentation and to ensure even crude oil to be sent to the plant. The temperature inside the storage tank should be 10°C~20°C higher than the melting point of the oil fat. Before the RBD palm oil been sent to the crystallizer, it has to be processed tho-

ugh a plate heat exchanger. This will heat the oil from 45°C to 70°C approximately, fu-

lly melting the solid oil.

(2)Crystallization and crystal growing.

The temperature of oil slurry and water is measured and recorded. The water temperature is controlled by gradual program using a micro-information processor to ensure the crystallization in the pre-arranged cooling curves.

The time of crystallizing is adaptable due to required quality of the product. This can be conducted by the curve line in the computer in the control room. Extra big cooling area guarantees the maximum flexibility and easy handling. The crystal obtained is even and filterable with stable structure.

(3)Filteration.

Oil slurry gradually enters into the space though the filter plate piece by piece. Liquidfat flows out by the corrugated channel of rubber membrane through the filter fabric and then enters the soft fat tank by closed pipe outside the filter’s frame, solid fat is leftover. When filter is stuffed with solid fat, it stop input the crystallized palm oil and diaphragm will inflate under high pressure (usually condensed air) to press the solid fat. Thus, the remaining liquid fat can be clearly removed. After been pressed, recycled oil slurry is conveyed into purge oil tank for temporary storage, the entrance of oil slurry be purged by condensed air. Opening the filter to releasing filter cakes is followed after releasing the pressure of the filter. Slipping chain with a hook moves along the 2 girders making the diaphragm to shift piece by piece so that filter cake can drop into the melting oil slot easily. The filter cake afterwards will be heated to melt and then be pumped into the solid fat storage tank. Filter fabric should be cleaned periodically by hot liquid fat and the solid fat should be melted.

Note: We have the different oil mill factory for the visit.

We can supply the turn-key project, please contact us .

Shandong Leader Mechanical Equipment Co., LTD believe that whatever the field is, quality has always been at the heart of the company’s performance. We treat quality and service as a way of life and hope to serve you in the LD possible manner on a long term and mutually beneficial basis. If you want to know more information about our sunflower oil plant or any other seed processing plant, please contact us in the following form. Our responsible, experienced sunflower oil processing technical team is always ready to serve and guide you at any time.

All the other oil seeds pre-treatment and oil refining equipment, lLD sheller, cleaning sieve, cooker, filter and others is available at Guangxin. If you want to know to start a vegetable oil pressing line with oil press machine, please contact us, we will offer you the LD plan.

Contact:Heidi

Skype:heyabc

Tel:+86 15953125015(also Whatsapp)

Email:sales5@ldfoodmachine.com

Shandong Leader Mechanical Equipment Co., LTD is your LD choice!