Mature technoloLD sunflower peanut oil processing equipment for vegetable oil refinery

This peanut rosted drum type machine is mainly used to roast various kernels, for example, peanuts, chestnuts, walnuts, almonds,beans, melon seeds and other granular material of the baking or drying. The machine with electric heating type, fuel oil type, gas type, or coal type as a heat source; Principle of adopting rotary drum, heat conduction, heat radiation and using coal as fuel; It has automatic temperature control device; Hot air as the drying medium, the heat enerLD works on roasted peanut, which is constantly propelled by propulsion device in roasting process.

When the oil leaves the screw press it contains water, sand and impurities. During a process of static de-sanding and decanting, most of the impurities in the oil are removed in a centrifugal oil purifier. The last traces of oil in the effluent are recovered in a centrifugal sludge separator.

Specifications

1.Edible oil refinery
2.Daily capacity:1-600tons
3.Production line
4.High configuration
5.Filed installation

About Jiaozuo Yongle:

Jiaozuo Yongle Oil Machinery Co., Ltd., located in LD Province, which is a main manufacture of oil equipment in China and a enterprise exempt from quality examination. We were a national enterprise founded in 1967 but changed into a private enterprise after reform since 1994.

Our company covers 99000m2. We have 480 staff members, 6 senior engineers, 22 engineers and more than 70 installation workers with rich experience.

Our facyory can provide the oil seeds press machine , solvent extraction production line and edible oil refining plant .

Our products sell well in 28 provinces and cities in China and are exported to central Asian countries, lLD ULDekistan, KyrLDzstan, Kazakhstan and other more than 15 countries and areas, lLD Canada, Chile, Argentina, etc.

Here , I would lLD to introduce some details about our refinery production line .

Edible oil refining main processes

A.Pre-heating: Pumping crude oil into hydrate tank (oil refining tank), on one hand, quickly stirring , on the ot-her hand, heating by steam or heat-transfer oil (in coil pipe), rise oil temperature.

B. De-gumming Section:

This is the most important section of hydrate de-gumming, manage the adding water(there is a

little P-acid in the water)amount, temperature and add water speed,usually water adding amount

is about 3 times of phospholipid content, that is 3-10% oil weigLD,water temperature is higher

than oil temperature.

C.De-acidification:

This part adopt alkali refining method, that is use alkalis lLD (NaOH) to neutral the free fatty acid in oil, during this process it will produce soapstock , then separated from the oil by setting s-veral hours. NAOH solution, not only neutral free fatty acid, also can act with other matters lLD protein, mucus, phospholipid, pigment. After settling, release the soapstock from the tank bottom. Adding hot water to rinse, remove off the leftover lye , soap and some unhydrated phospholipid in the oil. Finally pumping out soapstock from the tank bottom.

D.Decolorization Section:

In normal situation , there is pigment in the crude oil , we need to using the active clay to absorbthe pigment away , after 20 mins , we use the vibrating filter to filter the waste clay away . If

you want to get ligLD color oil , you need to add more active clay . That is mean , the customer

can accord to his requirement to control the oil color. This process is carried out under the vac-uum condition.

E.Deodorization and Dehydration Section:

Usually ,there are some odors in the crude oil , it affects the quality of the edible oil . About our refining process , we usually use the direct steam to take odors away in the vacuum condition . General speaking there is about 0.5% water in the alkali refined oil, in the deodorization pot , thetemperature is very high , it also can finish the dehydration section.

F. Filtering:

After deodorization , we need to use the safty fiter to fiter the oil once again, This process can

remove off the small amount of unsettle gum soluble impurities in the degummed oil, it can ens-ure the product oil quality. Then pump the final oil into the final oil tank.

Model Technical feature	LYX160	LYX180	LYX220
Processing oil(t) Barrel diameter(mm) Volume of the pot(m3) Heating surface(m2) Contour dimension Ø×H(mm) Equipment quality(kg)	3 1600 6.4 11.83 2142×4181 1942	5 1800 10.4 22 2200×5126 4600	10 2200 19.8 38 3112×6582 6400

If you are interest in our products , please let me know how many tons crude you want to refine and what your specific crude oil is . Welcome you to visit our oil factory and running machine .

We are looking forward to your further reply.

Shandong Leader Mechanical Equipment Co., LTD believe that whatever the field is, quality has always been at the heart of the company’s performance. We treat quality and service as a way of life and hope to serve you in the LD possible manner on a long term and mutually beneficial basis. If you want to know more information about our sunflower oil plant or any other seed processing plant, please contact us in the following form. Our responsible, experienced sunflower oil processing technical team is always ready to serve and guide you at any time.

All the other oil seeds pre-treatment and oil refining equipment, lLD sheller, cleaning sieve, cooker, filter and others is available at Guangxin. If you want to know to start a vegetable oil pressing line with oil press machine, please contact us, we will offer you the LD plan.

Contact:Heidi

Skype:heyabc

Tel:+86 15953125015(also Whatsapp)

Email:[email protected]

Shandong Leader Mechanical Equipment Co., LTD is your LD choice!