Good condition and quality crude palm oil refinery

Sunflower oil production line basic flow chart:oilseeds pretreatment→pre-pressing→solvent extraction→oil refining.Our engineer can design different process of sunflower oil extraction machinery, according to the different requirements and target price.

Shandong Leader Mechanical Equipment Co., LTDcan configure design process sunflower seed oil extraction production line for the customer, under normal circuLDtances, process engineers will configure the latest technoloLD to customers depending on customer requirements and target price.

Good condition and quality crude palm oil refinery

Palm oil equipments flowchart:

hot water

↓

Crude oil→filter→mix→reactor→mix→reactor→centrifugal separation→oil residue

↑ ↓

Phosphoric acid ↓

↓

degumming oil←dry←heat← ← ← ←

↓

↓

bleaching earth→mix→decoloring→filter→decoloring oil→mix→heat

↓

refined oil←filter←cool←deodorizing←vacuum

Batch type:

Continuous Type:

Main Section Introduction of crude palm oil refinery :

(1) Refining section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.

(2) Decoloring section: used to remove off pigments, bleaching oils and grease dehydrate.

(3) Deodorizing section: to remove off the odor components in oil.

(4) Dewax: used to remove off the wax in the oil, in order to get the high quality oil.

(5) Heat-transfer oil stove: supply each device production needing heat enerLD, temperature reach

above 280°C.

(6) Steam generator: produce the needing steam for de-odoring and distillation.

(7) Vacuum pump: supply needing vacuum for dehydrate, de-color, deodor. Vacuum degree can

reach above 755mm Hg.

(8) Press filter: filter clay, filter out clear oil.

(9) Air compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.

Process specification of crude palm oil refinery:

1.The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C),

and then goes to the bleaching earth mixing tank.

2.The bleaching earth is delivered from the low bleaching box to the temporary tank by wind.

3.The bleaching earth is added by automatic metering and is interlockingly controlled with the oil.

4.The main function of decoloring process is to remove oil pigment, residual soap grain and metal

irons.

5.Under negative pressure, the mechanical mixing method combined with steam mixing will improve

the decoloring effect.

6.The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred

by non-powered steam.

7.The decolored oil enters into the two alternate leaf filters to be filtered.

8.Then the filtered oil enters the decolored oil storage tank through the security filter.

9.The decolored oil storage tank is designed as the vacuum tank with the nozzle inside, so as to

prevent the decolored oil contacting with the air and influencing its peroxide value and color

reversion.

Product oil specifications:

The specification of crude palm oil

Shandong Leader Mechanical Equipment Co., LTD supply the complete set of Cooking oil production line machinery including sunflower oil production line, palm oil production line, soya bean oil production line, peanut oil production line, cotton seeds oil production line, maize corn germ oil production line, clamelia oil production line, rapeseeds oil production line, canola oil production line, coconut cropra oil production line, shea oil production line, groundnuts oil line, sesame oil production line,black seeds oil production line, jatropha seeds oil production line,moringa seeds oil production line.

Welcome Contact us any time!

Contact:Heidi

Skype:heyabc

Tel:+86 15953125015(also Whatsapp)

Email:[email protected]

Shandong Leader Mechanical Equipment Co., LTD is your LD choice!