FFB palm oil processing plant machinery manufacturer

Sunflower oil production line basic flow chart:oilseeds pretreatment→pre-pressing→solvent extraction→oil refining.Our engineer can design different process of sunflower oil extraction machinery, according to the different requirements and target price.

Shandong Leader Mechanical Equipment Co., LTDcan configure design process sunflower seed oil extraction production line for the customer, under normal circuLDtances, process engineers will configure the latest technoloLD to customers depending on customer requirements and target price.

FFB palm oil processing plant machinery manufacturer

Safety:

1. we using auto welding machine to make the reactor,which can guarantee the quality of welding seam,avoid cracking and has a long life for about 8 years.

2. professional heating treatment and x-ray detection chamber for welding seam .

3. vacuum system to prevent oil gas be back to reactor causing accident.

4. with professional thermometer , profession pressure gauge and safety valve.

Environment friendly:
1.de-dusting system to prevent gas and dust from coal burning

2.the exhaust gas will be recycled for heating reactor ,no gas pollution

3.well sealing on every junction parts to prevent gas leak,no smelly

Longer life :
Using Q345R special steel plate ,welding seam with auto welding an will get heating treatment and x-ray detection to extend the life of reactor to the most extend, and the life will 8 years

EnerLD saving:
1. well sealing for heating system ,no gas leak and saving fuel.

2. the exhaust gas will be recycled for reactor heating.

1. Fruit peeling and pressing process

Reception station:

A,The FFB bunches will be transported to factory by truck, after be weigLDed by weigLDing bridge, the FFB will be

loaded down to FFB Loading Ramp.

B,The iron door of unloading ramp is controlled by hydraulic device, Get the power from Hydraulic pump station.

Starting on the hydraulic device, iron door be lifted. FFB will fall down to the Palm Fruit screw conveyor, and transported to pre-treatment plant, to Sterilizers.

Sterilizing process:

A,By Scraper Conveyor, FFB be transported to the top of sterilizing tank. Falling into sterilizing tank from feed inlet.

B,Sterilizing tank: The inside diameter of sterilizing tank is φ2000mm, length 12500mm, welded up by Q235B material (Chemical composition:C0.12~0.2%,Si0.12~0.3%,Mm0.3~0.7%,PCu

C,After FFB be transported into sterilizing tank (202), close the door of sterilizing tank, and open the vent valve behind

the tank, then saturated steam, which pressure is 3bar and temperature is about 130°

D.After all the cooling air have been discharged out,close vent valve, proceed to sterilizing section. Sterilizing takes55~60minutes.

E,The time of sterilizing is also according the kind of FFB, if the pressure is too high or the time is too long , palm fruit

will be rot, also Resulting in the loss of oil, high temperature can change palm color.

F, Finish sterilizing process, close the steam valve, open the valve lead to Blow-off/down Silencer, can’t open the

sterilizing tank door until discharges out all steam and water.

G, Open the sterilizing tank door, sterilized FFB will fall on the FFB Scraper conveyor. Be transported to next station.

palm oil machine press:

A, The palm fruit is transported to Crush tank by fruit elevator.

B, The fruit in crush tank will be heated to 90~95°C, crush time is 10~20 minutes.

C, The pounded fruit flow into Palm fruit oil presser to press. Oil press cone can control cLDinder,

working pressure is 50~70bar, revolving speed of presser main shaft is 12.5 r/min. Meanwhile the

mixture of crude palm oil and water Storage oil tank through crude oil groove. Then oil will be

pumped to Screening filte by oil pump. After filtering take out the oil foam, deposit impurities.

Palm oil flow into Passivating oil tank. The fiber cake and nucleus are exhausted from clearance

of cone head drop on Breaking cake auger.

WeigLDing---Reception--Sterilizing threshing-----Digesting----- Mashing---- Pressing ---- Depositing &Purification

----Filtering ----Palm crude oil

2. Palm kernel recycling and pressing process

Pressing cake ---- Crushing----Separating fiber&kernel ----- Crusher ----- Kernel&peel separator ----Kernel dryer

---- Drying kernel -----Crushing ----- Pressing

FFB palm oil processing plant machinery manufacturer

crude oil dewaxing /fractionation equipment for sunflower seed ,cottonseed oil ,palm etc.

crude oil dewaxing /fractionation equipment for sunflower seed ,cottonseed oil ,palm etc.

FFB palm oil processing plant machinery manufacturer

Shandong Leader Mechanical Equipment Co., LTD supply the complete set of Cooking oil production line machinery including sunflower oil production line, palm oil production line, soya bean oil production line, peanut oil production line, cotton seeds oil production line, maize corn germ oil production line, clamelia oil production line, rapeseeds oil production line, canola oil production line, coconut cropra oil production line, shea oil production line, groundnuts oil line, sesame oil production line,black seeds oil production line, jatropha seeds oil production line,moringa seeds oil production line.

Welcome Contact us any time!

Contact:Heidi

Skype:heyabc

Tel:+86 15953125015(also Whatsapp)

Email:sales5@ldfoodmachine.com

Shandong Leader Mechanical Equipment Co., LTD is your LD choice!